Knowledge Base

OEM Tango 1.113 Car Key Programmer Full Software & Transponder

SKU: OEM Tango Price: 198.0000 USD Category: Auto Key Programmer

The OEM Tango 1.113 is a professional transponder programmer that reads, writes, and generates keys for a vast range of vehicles, including Toyota, Honda, BMW, Audi, and VW. With full software and advanced immobilizer functions like BMW CAS and VW/Audi key making, it delivers complete key programming solutions in one device. Compatible with Windows XP, 7, and 8, this user-friendly tool is an essential investment for locksmiths and auto workshops worldwide.

The TANGO transponder programmer is developed to cover, read, write and generate the latest transponders used in the latest vehicle immobilizer technologies

OEM Tango Programmer Software Version:

Firmware Version : v1.111.3;
Software Version : v1.111.3;

Supported Languages: English.

Operation Notes OEM TANGO can work for Windows XP(SP2 or later) Professional Version,Windows 7 Ultimate and Windows 8 Professional; Tango Software Version V1.111.3 ；

OEM Tango Support List: Acura Brilliance Chang an Chang cheng Chery Daewoo Daihatsu FAW Group Geely Great Wall Honda Hyundai Infiniti Isuzu Kawasaki Kia Lexus Mazda Mitsubishi Nissan Proton Roewe Saipa Sammand SsangYoung Subaru Suzuki Tata Toyota Yamaha AD100 Out In codes 8 digits calculator

BMW CAS Keyless Go key maker BMW CAS remote key maker BMW CAS unlock and write locked with unknown password transponders PCF7943&PCF7944 key maker BMW bikes (Hi Tag 2) Key maker DAF key maker KESSY (Hi Tag 2) Audi , Bentley, Porshe, VW key maker New AUDI A6/Q7 EZS (Megamos 8E) Key maker VW Key maker FREE Offline Full Copy of TIRIS DST (ID6070) onto TPX2,EH2 FREE Image generator ID70 on ID4D Image generator ID67/68 on ID4D Full FREE production of TP22, TP23, TP24, TP25

Package Including: 1pc x Interface 1pc x USB 2.0 Cable 1pc x One Box

VNCI MDI2 GM Diagnostic Tool CANFD DoIP Protocol

SKU: VNCI MDI2 Price: 219.0000 USD Category: Auto Diagnostic Tools

Unlock full GM diagnostic capability with the VNCI MDI2, a cost-effective alternative to the original MDI2 that supports CAN FD and DoIP protocols for faster, safer programming. Compatible with all GMC, Chevrolet, Buick, Cadillac, and Opel models from 1996 to present, it delivers 100% original performance for less than 10% of the price, includes free GDS and Tech2win software registration, and works on unlimited computers.

Software installation service is provided free of charge when purchasing equipment VNCI MDI2 is GM diagnostic interface that can be replace genuine GM MDI2 interface, compatible with the original driver. MDI2 is applicable to General Motors Global A platform and global B platform series models

Advantages:

100% support CAN FD communication, 100% support DoIP communication
Support TLC online software, synchronization compatible with the latest MDI2 driver,
Simulate the original GM MDI2 hardware device without worrying about hardware verification
Support B platform offline programming, decrypt 27 security check algorithm
Free registration of GDS, DPS, Tech2win software
Unlimited computer can be installed to any computer
Support USB and wifi direct connection and base station connection
Faster and safer
Cost-effective, 100% original performance, only need less than 10% of the price

Features:

Support all GMC, Chevrolet, Buick, Cadillac and Opel models from 1996 to the present
Support SAE J2534 Pass-Thru, CAN FD, DoIP, UART, Class2, KWP2000, GMLAN(CAN) protocol
Support key matching, offline and online module programming, diagnosis
Support CANFD/DoIP module diagnosis and programming
Support GM global A platform models and global B platform models
Support Pass-Thru programming program TIS2WEB-SPS, compatible with all functions of MDI generation

VNCI 6154A VAG Diagnostic Tool for ODIS-Sv23/E Plug & Play

SKU: VNCI-6154A
Price: 119.0000 USD
Category: Auto Diagnostic Tools

The VNCI 6154A delivers seamless, plug-and-play diagnostics for VW, Audi, Skoda, and Seat vehicles, fully compatible with ODIS-Sv26/ODIS-Ev22. Perform advanced coding, programming, and control unit troubleshooting with reliable, dealer-level performance. Boost your workshop efficiency with this cost-effective, ready-to-use VAG diagnostic solution.

Overview
The VNCI 6154A is a professional-grade VAG diagnostic interface designed for VW/Audi/SEAT/Skoda vehicles. Engineered for seamless integration with the ODIS-S (Offboard Diagnostic Information System) software version Sv23/E, this plug-and-play tool delivers dealer-level performance at a fraction of the cost. Whether you're an independent workshop, mobile mechanic, or advanced DIY enthusiast, the VNCI 6154A offers reliable, fast, and secure communication with your vehicle's electronic systems.
Key Features

True Plug & Play Operation: No driver installation hassles or complex configuration required. Simply connect the VNCI 6154A to your vehicle's OBD-II port and your PC, launch ODIS-Sv23/E, and start diagnosing immediately.
Full ODIS-S Support: Compatible with ODIS Service version 23 and E, allowing for comprehensive diagnostics, coding, adaptations, and control unit programming.
High-Speed Data Transfer: Equipped with USB 2.0 connectivity and an advanced CAN interface, ensuring fast, stable data exchange between the vehicle and diagnostic software.
Dealer-Level Functionality: Performs all major functions including reading/clearing fault codes, live data streaming, actuator tests, control unit coding, security access, and basic settings.
Wide Protocol Coverage: Supports CAN, K-Line, UDS, and other key automotive protocols, ensuring compatibility with modern VAG models.
Durable Construction: Built with a rugged, shock-resistant housing and high-quality internal components designed for daily workshop use.
Cost-Effective Alternative: Provides OEM-equivalent diagnostic capability at a significantly lower investment, making it ideal for growing independent repair businesses.

Compatible Vehicles & Protocols
The VNCI 6154A is specifically designed for the Volkswagen Group (VAG) family, which includes the following marques:

Volkswagen (VW) – including Passenger Cars and Light Commercial Vehicles
Audi
SEAT
SKODA

It is fully compatible with most vehicles from 2000 onwards, covering all modern VAG platforms, up to and including the latest models supported by ODIS-Sv23/E. The tool supports a wide range of diagnostic protocols including ISO 9141-2, KWP2000, and CAN (Controller Area Network) with both 11-bit and 29-bit identifier support. It also communicates with UDS (Unified Diagnostic Services) protocol modules found on the newest generation of vehicles.
What's in the Box

VNCI 6154A VAG Diagnostic Interface Unit
OBD-II to OBD-II Diagnostic Cable
USB 2.0 Connection Cable
Protective Storage Case
Quick Start User Manual

Note: The ODIS-S software is not included on physical media and must be obtained separately by the user, as per technical licensing guidelines.
Why Buy the VNCI 6154A?

Time-Saving Efficiency: This tool drastically reduces diagnostic time compared to generic OBD-II scanners, allowing you to access manufacturer-specific modules and functions with ease.
Professional-Grade Accuracy: Access the same detailed data and diagnostic routines used by VAG dealerships, ensuring precise diagnosis without guesswork.
Immediate Return on Investment: Avoid costly dealer visits for simple diagnostics, coding, or services. Perform VW/Audi-specific tasks such as battery adaptation, electronic parking brake service, and throttle body alignment in-house.
Reliable After-Sales Support: Backed by a responsive technical support team to assist with any installation or usage questions, so you are never left without help.
Future-Ready Firmware: The device supports ongoing updates (where available) to keep pace with software revisions and new vehicle introductions.

Upgrade your workshop today with the VNCI 6154A and unlock the full diagnostic potential of your VW/Audi/SEAT/Skoda vehicles with professional precision and speed.

VNCI 6515SZ Suzuki Diagnostic Tool for SDT-II Software

SKU: vnci-6516sz Price: 169.0000 USD Category: Auto Diagnostic Tools

Diagnose and program Suzuki vehicles with full OEM-level functionality using the VNCI 6515SZ, which is plug-and-play with the original SDT-II software and requires no third-party tools. It supports USB, WiFi, and wireless LAN connections, covers 3-way CAN and K-line protocols, and works on models from the Grand Vitara to SX4. This affordable alternative to the MTS 6516 delivers 100% genuine features, including module programming, key matching, and pass-through reprogramming.

VNCI 6515SZ Suzuki automobile diagnostic tool is compatible with the original SDT-II software driver. No third-party software is required. It is plug-and-play and can replace the original MTS 6516 Suzuki special inspection tool. Supports USB connection, WIFI direct connection, wireless LAN connection, supports 3-way CAN, 2-way UART, K line and other automotive communication protocols, and can perform diagnostics, module programming, key matching and other operations on most Suzuki vehicles.

Product function

Support most Suzuki car diagnostics, programming and immobilizer matching functions

It can replace the original MTS 6516 suzuki equipment and has the same functions as the original equipment.

Product Features

Compatible with original software, no third-party software required, plug and play
Supports three connection methods: USB connection, wifi direct connection, and wireless LAN connection
100% genuine function, 10% genuine price

Features The SDT 2 can diagnose the vehicle faster compared to previous tools giving you more time to repair the vehicle. The SDT 2 has similar diagnostic features compared to the original SDT, plus new features like VIN Lookup, Vehicle Health, and Communication Bus Check. The SDT 2 also has an accessory WIFI dongle (Included with this kit) allowing you to diagnose vehicles remotely from your workbench. The SDT 2 kit contains a VCI interface module, a 3M USB cable, and a 1.8M DLC cable (to diagnose a vehicle) The SDT 2 requires Software available from the European Suzuki website The SDT 2 diagnostic software only works on the latest Suzuki model vehicles (see model application list). The software requires a PC or Laptop with Windows 7, 8, 8.1 Grand Vitara (SQ625) 1999-2005 Engine/ Powertrain ABS Airbag BCM OMRON HVAC Grand Vitara XL7 (JA627) 2001-2006 Engine/ Powertrain TCM AWD 5AT ABS Nisshinbo 4WD JIDECO Airbag OCM (*1) BCM OMRON HVAC TPMS (2005-) Grand Vitara (JB627) 2006-2008 Engine TCM ABS/ESP® 4WD Airbag BCM TPMS is a built-in BCM. HVAC Immobilizer Grand Vitara (JB424/632) 2009-2014 Engine DENSO(2.4L) Bosch(3.2L) For 2009-2010MY TCM 4WD Airbag BCM TPMS is a built-in BCM. HVAC Immobilizer SX4 (RW420) 2007-2014 Engine TCM AT(-2009) CVT(2010-) ABS/ESP® 4WD Airbag BCM TPMS is a built-in BCM. HVAC Immobilizer(2008-) Reprograming The SDT 2 can also be used for pass-through reprogramming of modules on most Suzuki vehicles when combined with the SEPS software (see SEPS application list). Available from SUZKI European tech website Immobilizer Note: The SDT 2 now has Immobilizer key reprogramming function available using the accessory Immobilizer Dongle (Part # F-00K-108-870 only available to Suzuki Authorized Service Providers. (Not available to the aftermarket in EUROPE AT THIS TIME). Package Include 1 x VNCI 6516SZ 1 x 2M USB

VNCI RNM 3-in-1 Nissan/Renault/Mitsubishi Scanner Immobilizer ECU TCM DoIP

SKU: VNCI-RNM
Price: 329 USD
Category: Auto Diagnostic Tools

Unlock full diagnostic, programming, and immobilizer capabilities for Nissan, Renault, and Mitsubishi vehicles with this 3-in-1 VNCI RNM scanner. It supports DoIP protocol and replicates all functions of Consult 3 Plus, CAN Clip, and MUT-3, ensuring seamless ECU and TCM work across every model from all three brands.

Powerful and stable diagnostic VCI, support car from 1995 to now, include new electric car equipped with OBDII-16 socket. To use the VCI, you must install and run device management software before run diagnostic software, please read the manual in CD carefully to learn how to make VCI work.
5 main features:

Support latest CONSULT-III Plus, R2R, CONSULT-IV software
Support latest CLIP and ADT software
Support latest MUT-III software
Compatible with Passthru 04.04 and 05.00, ISO 22900-2
Support latest diagnostic protocol for new car model, such as CAN FD, DoIP

Which type of vehicles can do?

for Nissan Ariya EV vehicle
for Nissan Leaf EV vehicle
for Nissan all gasoline vehicles
for Infiniti all vehicles
for DATSUN all vehicles
for Renault all vehicles
for Mitsubishi all vehicles

Support Three Connections Modes:

USB connection
Access Point connection
WLAN Infrastructure connection.

VNCI RNM advantage

Replacement of original diagnostic tools:The VNCI RNM is a complete replacement for the consult 3 plus VI3 diagnostic tool, providing professional-grade diagnostic capabilities for Nissan, Renault and Mitsubishi vehicles.
Compatibility with the latest software versions:VNCI RNM supports the latest consult 3 plus v226 and above software versions, ensuring you have access to the latest diagnostic features and performance.
Multi-brand support:The VNCI RNM is available vehicles for Nissan, Renault and Mitsubishi brands, covering a wide range of models and systems from these brands.
Powerful diagnostic capabilities:VNCI RNM offers a wide range of diagnostic capabilities, including fault code reading and clearing, sensor detection, real-time data stream monitoring, programming and coding, special function activation, and more.
Easy to use:VNCI RNM is simple and intuitive to operate, with a user-friendly interface and an easy-to-navigate menu structure that allows you to quickly and accurately perform diagnostic and repair operations.
Reliability and stability:VNCI RNM uses high-quality hardware and stable software to ensure the reliability and stability of the diagnostic process to provide accurate diagnostic results.

Package Includes:

1pc x VNCI RNM interface
1pc x USB cable

VNCI PT3G Porsche Diagnostic Interface for PIWIS - Plug & Play

SKU: VNCI-PT3G Price: 279 USD Category: Auto Diagnostic Tools

Experience full Porsche diagnostic capability with the VNCI PT3G, a true plug-and-play interface that works seamlessly with the original PIWIS software. It covers all Porsche models from 1996 to the latest, enabling diagnostics, coding, and programming at a fraction of the dealer-tool cost. Connect via USB or WiFi and perform professional-level service effortlessly.

Note: 279usd is VNCI PT3G price without PIWIS3 software

If you would like to purchase a PIWIS3 software computer , please contact me via email, skype or whatsapp

email: flywang1688@163.com

whatsapp: +86 13421934653

PIWIS3 diagnostic softwre v42.20

The VNCI PT4G Porsche Diagnostic tool is designed for diagnostic, programming and immobilizer operations on both old and new Porsche models. Compatible with the original Porsche diagnostic system PIWIS software driver, supports the latest PIWIS software and any PIWI version. It can completely replace the original Porsche diagnostic tool PT4G. VNCI PT4G supports USB, WIFI direct connection and WIFI LAN three kinds of connection.

PIWIS diagnostic software supports 23 languages, including German, English, Chinese, French, Italian, Spanish, Japanese, Polish, Portuguese, and Dutch

Support Porsche 9PA 9YA 9YB 92A 95B 918 970 971 981 982 986 987 991 992 996 997 Y1A and all Porsche models from 1996 to the present.

Introduction to PIWIS3 diagnostic system

The PORSCHE PIWIS Diagnostics system is used for fault finding diagnostics and code refresh programming of the control unit for Porsche vehicles, and the PIWIS3 TESTER integrates complete diagnostic functions for all Porsche models. PIWIS3 also allows different control units to be read simultaneously, simplifying diagnostics. Ecus can be coded automatically, individually, or from a control table. The PIWIS3 vehicle status record (known as the VAL Protocol - Vehicle Analysis Log) is now automatically registered when the vehicle is in use, during maintenance, and after maintenance has been completed. The PIWIS3 can be used for DC and AC voltage measurement, DC and AC current measurement, diode test, resistance measurement, on/off or open circuit test to show the change of voltage, current and resistance over time, with oscilloscope function.

PIWIS3 Software system Troubleshooting Guide is faster and easier to use. It can display all diagnostic information, initiation procedures, and possible fault sources, and significantly revised "guided fault finding" (GFF) means that repeated repairs (" first fix ") are further reduced. Integrated online teaching function, easy operation, integrated new database, direct access to the Porsche PIWIS workshop technical information system

Piwis3 features:

Diagnose the application

Boot Fault Finding (GFF)

Actual value/input signal function

Drive link/test function

Maintenance/repair function group

Coding/programming function group

Logging8. filter

Application of wiring diagram

Supports Porsche PPN online remote, has the latest PIDT engineering database, allows you to code Panamera, Cayenne E3, Taycan and more

Features and specifications of the PIWIS system

Read/clear error codes, capture data flow, computer programming matching, component testing, service information consulting, component field drawing, wiring diagram.

Porsche Piwis Tester IV works with old and latest Porsche cars. It comes with a Panasonic laptop and original test software. The Porsche Piwis Tester IV helps you diagnose and program the latest and old Porsche cars. Examples include the 911(997)(991), Boxster/Cayman(987), 2010-2010 Cayenne, 2011-2011 Cayenne, and Panamera.

The new Panamera can only be diagnosed using the Porsche Piwis Tester IV. According to the current project plan, all early models will be gradually replaced by the new Porsche Piwis Tester IV by the end of 2010. The Porsche PIWIS Tester IV covers all-new Porsche models such as the all-new Panamera 971, Cayenne 9Y0 E3, Panamera 992, Cayman 982 GT4 Clubsport, etc., which do not support the PIWIS II at all. Will not support it in the future.

Support Porsche. Once the early diagnostic procedures are transferred to the Porsche Piwis Tester IV, the Piwis Tester I will no longer be available. When Porsche Piwis Tester IV is distributed, it will include a basic software. This is necessary to start and configure the tester. This system will support Porsche Macan CarPlay activation and PPN online remote support, it does not support Porsche CarPay full screen activation.

Porsche Piwis Tester IV support system

Engine automatic transmission, air conditioning, SRS, ABS, ASR, MPL, GM, original anti-theft system, keyless system, OBDII system.

BGM gateway module online programming

Porsche Tekken Sport software update

The rear/front modules are programmed, new or used depending on the state of the car

Key programming (keys sorted by VIN)

Second-hand ECU CP module is unlocked

Engine control module replacement programming

Transmission module PPN online programming

VTS disable

OEM renovation project PPN coding programming

2019-2022 Sport Chrono Sport plus remote activation of PIWIS4 and 5054A VCI

Each project checks the OEM retrofit wiring diagram, such as 360 Surround view, ACC, AMP

OEM modification remote guide technical support hourly or per VIN login check

OEM Apple CarPlay activation for the Porsche Macan 95B via PPN online

PIWIS 4 System update supports PPN online and PIDT new

Gateway module online programming -

Porsche Taycan Sports Software Update -

Back/front end module programming -

Key programming (key press VIN order)-

Used ECU module CP unlock -

VTS Disable -

OEM retrofit project PPN coding programming -

Check the OEM retrofit wiring diagram for each project -

OEM retrofit remote guide technical support every hour

Porsche OEM refit, please specify item -

OEM Apple CarPlay online activation via PPN -

PIWIS3 System update supports PPN online and PIDT new -

SMARTPCM Device Suite for PCM Solutions -

PCM5 MH2p Full screen CarPlay enabled -

PCM5 MH2p Android automatic activation -

PCM4/4.1 MHI2 Android Automatic activation -

PCM5 MH2p system Region conversion USA -> EU, USA -> Japan, USA - tw -

PCM4/4.1 MHI2 system Region Conversion USA -> EU, USA -> Japan, USA - tw -

VNCI 6154B VW Audi Diagnostic Tool ODIS OEM VCDS-III Compatible

SKU: VNCI-6154B
Price: 189 USD
Category: Auto Diagnostic Tools

Unlock professional-level diagnostics for VW and Audi vehicles (1996-2026) with the VNCI 6154B, offering full compatibility with both ODIS and VCDS-III software in one device. Enjoy blazing-fast performance with USB speeds 40x faster and dual-band 5GHz Wi-Fi, plus three connection modes (USB-C, Wi-Fi, LAN) for ultimate flexibility. A cost-effective powerhouse that replicates all factory functions at a fraction of the original price.

VNCI 6154B Volkswagen & Audi Diagnostic Tool, Compatible with original factory software and drivers, plug and play.
Compared with the original VAS 6154B and HEX-NET, the VNCI 6154B is compatible with both ODIS and VCDS software drivers.
One device works as two, delivering an outstanding cost-performance ratio!
It supports 2.4GHz and 5GHz dual-band Wi-Fi as well as 5G wireless network communication. The USB communication speed is increased by 40 times,
and DoIP communication speed is boosted by 5 times.
The VNCI 6154B features three connection modes: USB Type-C, Wi-Fi P2P and LAN, meeting the needs of different usage scenarios.

It supports new protocols including DoIP and CAN FD, as well as classic protocols such as K-line. It covers all Volkswagen and Audi models from 1996
to 2026 and newer versions.
It fully replicates all functions of HEX-NEXT VCDS 3rd Generation, supporting full vehicle scanning, basic settings, adaptation and more professional functions.
Don’t hesitate—repair and modification shop owners, place your order now!
Compared with the VNCI 6154A and other similar products, the 6154B is upgraded not only in hardware configuration, but also with breakthrough functions
and leading-edge technology.
It delivers 100% of the two mainstream original factory-level functions at less than 10% of the original price. Choosing the VNCI 6154B is undoubtedly one of
the best decisions for auto repair and modification professionals.

Solved JLR “VCI Update” problem

解决安装路虎最新的驱动程序后，SDD和pathfinder软件通信不正常的问题

2. 将VNCI JLR DoIP恢复出厂设置

参考说明： https://vnciobd.com/?article/VNCI-Factory-Reset-Operation.html

3. 下载安装VNCI设备管理器，然后将设备固件升级到最新版本

VNCI设备管理器
https://ln5.sync.com/dl/cc17552a0#r4yqxaqs-iiuq2g4x-b9v8ef4n-3putav7v

4. 安装JLR VCI 设备管理器 v9.7.2798.42后，该版本不支持 SDD 和 Pathfinder 软件。

因此你需要将PDUAPI_Bosch.dll文件复制到以下路径以解决该问题：

"C:Program Files (x86)BoschVTX-VCIVCI Software (JLR)ProductsJLR-DoIPDoIP"

PDUAPI_Bosch.dll 下载地址：https://ln5.sync.com/dl/236399d50#qayjve8k-7k5fe6vj-d3qb5t85-hm5xsj67

Solved new jlr vci device manager do not support sdd and pathfinder software problem

1. Install the latest JLR VCI driver software

https://diagnosticdelivery.jlrext.com/idscentral/jlr_v9.7.2798.42_setup.exe.zip

2. Restore VNCI JLR DoIP to factory settings
Reference instructions:

https://vnciobd.com/?article/VNCI-Factory-Reset-Operation.html

3. Download and install the VNCI Device Manager, then upgrade the device firmware to the latest version VNCI Device Manager

https://ln5.sync.com/dl/cc17552a0#r4yqxaqs-iiuq2g4x-b9v8ef4n-3putav7v

4. when you installed JLR VCI device manager v9.7.2798.42, it will not be support SDD and pathfinder software

So you have to copy PDUAPI_Bosch.dll to following folder to solved the problem

“C:Program Files (x86)BoschVTX-VCIVCI Software (JLR)ProductsJLR-DoIPDoIP”

PDUAPI_Bosch.dll download address:
https://ln5.sync.com/dl/236399d50#qayjve8k-7k5fe6vj-d3qb5t85-hm5xsj67

VNCI PT3G wireless connection configuration details

Step1: Upgrade new version

you have to install newest version vnci pt3g device manager and upgrade the vnci pt3g firmware to the latest version, as shown below picture.

new version now(2024-07-04)

VNCI Device manager v2.0

firmware version: 1.0.6.3

Step2: Connect VNCI PT3G to the piwis software and switch to the USB cable wireless configuration state.

Step3: Configure the WLAN connection and AP connection network information

1. WLAN connection information configured， as shown below picture

① select "VCI configuration->WLAN Infrastructure" menu

② enter your network name and passoword

③ This check box must be checked

④ After entering all the correct configuration information, click “Update VCI” button to save the configuration information

2 . AP(Access point) connection information configured，as shown below picture

① select "VCI configuration->WLAN access point" menu

② Custom wireless network name(Default network name is “PTG_VCI_{device number}”) and password

③ This check box must be checked

④ After entering all the correct configuration information, click “Update VCI” button to save the configuration information

Step4: Pairing the current computer PIWIS3 system and VNCI PTG configuration information ( Very important! Very important! Very important! )

After the WLAN connection and AP connection configuration information are configured, you need to perform the matching operation on the PIWIS3 software of the current computer to use VNCI PT3G wireless connection on the current computer. Each time you replace the PIWIS computer, the VNCI PT3G wireless connection information must be matched again(important!!! important!!! important!!! )

As shown below picture

①select "VCI configuration->WLAN access point" menu

② Click "perform pairing now" button

③ If the pairing is successful, here is a "✔"， if the pairing is unsuccessful here is "X"

Step5: Disconnect usb port, Restart PIWIS3 software

1. Wirless connection by WLAN infranstructure

①Ensure that the current computer is connected to the network as same as the VNCI PT3G WLAN configuration network

②connect VNCI PT3G to your car or OBD16 power supply, Press and hold the VNCI PT3G button until the led light status changes, as shown bellow picture

WLAN Infranstructure connection LED light two status

③When VNCI PT3G connect to PIWIS3 software by WLAN Infranstructure , The VNCI PT3G make a deep sounds, and piwis3 software will show wireless connection icon, as shown bellow picture

1. Wirless connection by WLAN Access point connection mode

① Connect VNCI PT3G to your car or OBD16 power supply, Press and hold the VNCI PT3G button until the led light status changes, as shown bellow picture.

AP（Access point) connection LED light two status

② Enter the AP connection custom password, and after the device make a long deep sound, the PIWIS3 system will have a wireless connection icon, as shown bellow picture.

Note: The AP connection uses a wireless adapter, and when you have only one wireless adapter in your computer, you will not be able to access the Internet. If you want to connect to the Internet, you'll need an external wireless adapter.

VNCI 6154A AP connection and WALN connection configuration

AP connection configure

Default WIFI SSID : {VNCI 6154A serial number}

Default WIFI Password: 12345678

Usage method:

1. First connect the VNCI 6154A to the car or OBD16 for power supply

2. In the wireless network search box, find the VNCI 6154A WIFI SSID, enter the password and connect

Note: The AP connection uses one of your computer's wireless cards. If your computer only has one wireless card, you will not be able to access the Internet. The solution is to add an external wireless adapter

Customize the VNCI 6154A WIFI SSID and password:

1. First connect the VNCI 6154A to your computer via USB cable

2. Open your browser to access the following address: 192.168.13.69

3. Click “CONNECTIVITY->WLAN Access Point” menu and then Select “WLAN operating mode after startup”, As shown in the following picture.

4. Configure your custom WIFI SSID and password on the current page, then click Accept.

5. Select the "ADMINISTRATIOR" menu in the upper right corner, drop it to the bottom of the current page, select" Reboot System ", and click "Accept" to complete the configuration, After a successful restart, the device will make a deep sound, As shown below.

6. Disconnect the USB connection, connect the VNCI 6154A device to the car or OBD16 for 12v power, find our configured wireless information in the WIFI search box, select the custom SSID and enter the password to connect, As shown in the following picture.

WLAN connection configure

1. First connect the VNCI 6154A to your computer via USB cable

2. Open your browser to access the following address: 192.168.13.69

3. Click “CONNECTIVITY->WLAN Infrastructure” menu and then Select “WLAN operating mode after startup”, As shown in the following picture.

4. Drop down the current page to set the current WLAN SSID and password, After configuring the SSID and password and selecting the 2.4GHz communication frequency, and then click the Accept button, As shown in the following picture.

6. At this point, the VNCI 6154A device information has been added to the current WLAN "ruokewei-tp"(your WLAN), disconnect the USB cable, connect the VNCI 6154A device to your car or power the device with a 12 volt OBD16, when the VNCI 6154A make a long deep sounds, it indicate the VNCI 6154A device can be connected to any computer that using the same WLAN "ruokewei-tp"(your local area Network).

Note:

1. The frequency of the router that distributes the wireless LAN must be 2.4Ghz, and 5Ghz is not supported.

2. After you configure the AP connection and WLAN connection information, you can switch the AP connection and WLAN connection through the middle button of the device LED